Product ID:FLEXFRAM 605 PART B
MSDS Date:07/17/1998
FSC:8030
NIIN:00-097-9088
Status Code:A
Kit Part:Y
MSDS Number: CLPGL

Emergency Phone: 800-535-5053

Info Phone: 207-282-5911

Preparer: ERNEST CARTER

Cage: 62500

Telephone: 207-282-5911

Cage: 62500

SILICA, AMORPHOUS

CAS: 7631-86-9

BISPHENOL A-EPICHLOROHYDRIN EPOXY RESIN

CAS: 25068-38-6

RTECS: CE6880000

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:REMOVAL OF CURED MATERIAL BY GRINDING
MAY RESULT IN SUSPENDING SILICA DUST, CARBON FIBERS, AND NUISANCE
DUSTS IN THE AIR.INHALATION OF EPOXY RESINS MAY BE IRRITATING AND
SENSITIZERS.HOWEVER, RESIN IS NOT VOLATILE AND GENERALLY DOES NOT
PRESENT SERIOUS HAZARD BY INHALATION.
Effects of Overexposure:PRIMARY IRRITATION OF SKIN ON PROLONGED
CONTACT. IRRITATING TO THE EYES.
Medical Cond Aggravated by Exposure:ALLERGIES AND/OR OTHER RESPIRATORY
CONDITIONS.

First Aid:REMOVE TO FRESH AIR. GET MEDICAL HELP. EYES: FLUSH THOROUGHLY
WITH WATER FOR 15 MINUTES. SKIN: WASH WITH SOAP AND WATER.
INGESTION DO NOT INDUCE VOMITING AND CALL PHYSICIAN IMMEDIATELY.

Flash Point Method:COC
Flash Point:=157.2C, 315.F
Extinguishing Media:WATER SPRAY, CO2, OR DRY CHEMICAL.
Fire Fighting Procedures:FOR LARGE FIRES, USE WATER SPRAY, FOG, OR
FOAM. DIKE WATER RUN-OFF. PREVENT ENTRY INTO SEWERS OR NATURAL
WATERS. WEAR FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BE EVOLVED IF UNMIXED
MATERIAL IF INVOLVED IN A FIRE. WEAR SELF CONTAINED BREATHING
APPARATUS.

Spill Release Procedures:DIKE. WEAR APPROVED RESPIRATORY PROTECTION AND
OTHER PROTECTIVE EQUIPMENT AS NECESSARY TO PREVENT SKIN AND EYE
CONTACT. IF WARM, REMOVE LIQUID BY PUMPING INTO SALVAGE DRUMS.
SOAK UP RESIDUE AND SM ALL SPILLS WITH ABSORBENT MATERIAL SUCH AS
CLAY AND PUT INTO TIGHT CONTAINER. GUARD AGAINST FIRE HAZARDS IF
SOLVENTS ARE USED.

Handling and Storage Precautions:STORE IN TIGHT, STURDY CONTAINERS.
HANDLE IN ACCORDANCE WITH HAZARD POTENTIAL.
Other Precautions:REMOVE CONTAMINATED CLOTHING AND PROTECTIVE GEAR.
DECONTAMINATE. DESTROY LEATHER ARTICLES, INCLUDING SHOES THAT
CANNOT BE DECONTAMINATED. ANSI CLASSIFICATION 2. REMOVAL OF CURED
MATERIAL SHOULD BE ACC OMPLISHED WITH NIOSH APPROVED RESPIRATORS.

Respiratory Protection:NIOSH APPROVED RESPIRATORY WITH ORGANIC VAPORS
CARTRIDGE.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER GLOVES ARE REQUIRED TO PREVENT SKIN CONTACT.
Eye Protection:GOGGLES OR FACE SHIELD.
Other Protective Equipment:ARE NECESSARY TO PREVENT BODY CONTACT.
Work Hygienic Practices:AVOID SMOKING, EATING AND DRINKING IN THE WORK
AREA.
Supplemental Safety and Health

Boiling Pt:=315.6C, 600.F
Vapor Pres:.01@70 F
Vapor Density:9 AIR=1
Spec Gravity:1.503
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY VISCOUS LIQUID, MILD AROMATIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:REACTS WITH CONSIDERABLE HEAT WITH HOT
RESINS.
Hazardous Decomposition Products:CO2, ALDEHYDES, ACIDS, NO2, SO2.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:SMALL AND LARGE SPILLS: DISPOSE OF IN A LANDFILL
IN ACCORDANCE WITH LOCAL, STATE AND FEDRAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.